Skip to main content

Why We Use F&T Capacitors in Every Recap Job

Author: Donald Lee Service
Published:

Why We Use F&T Capacitors in Every Recap Job

Amplifier circuit board with capacitors

If you've ever brought a tube amplifier to Donald Lee Service for a recap — or if you're considering one — you may have noticed that we exclusively use F&T (Fischer & Tausche) electrolytic capacitors. This isn't a random preference or a matter of convenience. It's a deliberate choice based on 50 years of hands-on electronic repair experience repairing and restoring thousands of amplifiers. In this article, we'll explain exactly what a recap is, why it matters, and why F&T capacitors are the only brand we trust for this critical work.

What Is a Recap (Cap Job)?

A "recap" or "cap job" refers to the replacement of all electrolytic capacitors in an amplifier's power supply and signal path. Electrolytic capacitors are the cylindrical components inside your amp that store and filter electrical energy. They smooth out the high-voltage DC power that feeds your tubes and filter out unwanted noise and hum from the audio signal.

Over time — typically 15 to 30 years depending on usage and environment — electrolytic capacitors degrade. The electrolyte inside them slowly dries out, causing the capacitor to lose its ability to store charge effectively. When this happens, you may notice:

  • Increased hum or buzzing from the speakers, even with the volume turned down
  • Loss of headroom and dynamics — the amp sounds compressed or flat
  • Intermittent crackling or popping sounds
  • Ghost notes or oscillation at higher volumes
  • Reduced bass response or overall thinness in tone
  • In severe cases, capacitor failure can damage other components including resistors, diodes, and even transformers

A professional recap replaces all of these aging capacitors with fresh, high-quality components — restoring the amplifier to its original performance and ensuring reliable operation for decades to come.

Why the Choice of Capacitor Matters

Not all electrolytic capacitors are created equal. In a tube amplifier, the filter capacitors in the power supply must withstand sustained voltages of 400V to 500V or higher. The coupling capacitors in the signal path directly affect the tone and clarity of the audio signal. Using the wrong capacitors in a recap can lead to:

  • Premature failure: Budget capacitors rated for consumer electronics (TVs, computers) are not designed for the continuous high-voltage stress found in tube amplifier power supplies. They may last months instead of decades.
  • Tone degradation: Capacitors with poor electrical characteristics can introduce unwanted coloration, harshness, or loss of detail in the audio signal.
  • Reliability issues: Capacitors with wide tolerances (±20% or more) can cause inconsistent bias voltages, uneven tube wear, and unpredictable performance.
  • Safety hazards: A capacitor that fails catastrophically in a high-voltage circuit can cause arcing, smoke, or damage to expensive transformers and other components.

This is why the choice of replacement capacitor is one of the most important decisions in any recap job.

Why We Choose F&T (Fischer & Tausche)

F&T — short for Fischer & Tausche — is a German manufacturer that has been producing electrolytic capacitors since 1948. They are widely regarded as the gold standard for tube amplifier electrolytic capacitors among professional amp technicians, boutique amplifier builders, and serious audio enthusiasts worldwide. Here's why we use them exclusively:

1. Made in Germany to Exacting Standards

F&T capacitors are manufactured in Germany under strict quality control processes. Every capacitor is tested and verified to meet its rated specifications before it leaves the factory. This level of manufacturing precision simply isn't available from budget capacitor brands manufactured in regions with less rigorous quality standards.

2. Designed for High-Voltage Audio Applications

Unlike general-purpose electrolytic capacitors that are designed for consumer electronics, F&T capacitors are specifically engineered for the high-voltage, high-ripple-current demands of tube amplifier power supplies. Their voltage ratings are conservative and reliable — when an F&T capacitor is rated at 500V, it genuinely handles 500V with margin to spare. Many budget capacitors have voltage ratings that are optimistic at best.

3. Tight Tolerances for Consistent Performance

F&T capacitors are manufactured to tight capacitance tolerances, typically ±10% or better. This matters because the filter capacitors in a tube amplifier's power supply directly affect the DC voltage that feeds each tube stage. Capacitors with wide tolerances can result in voltages that are higher or lower than the design intended, which affects bias points, headroom, and overall tone. Tight tolerances mean predictable, consistent performance.

4. Exceptional Longevity

One of the most important factors in a recap is how long the new capacitors will last. F&T capacitors are rated for extremely long service life — typically 5,000 to 10,000 hours at maximum rated temperature and voltage. In real-world amplifier use (where temperatures and voltages are usually below maximum ratings), F&T capacitors routinely last 20 to 30 years or more. When we recap your amplifier with F&T capacitors, we expect those capacitors to outlast the next generation of ownership.

5. Low ESR (Equivalent Series Resistance)

ESR is a measure of how efficiently a capacitor can deliver stored energy. Lower ESR means better filtering performance, which translates to lower noise, tighter bass response, and cleaner power delivery to the tubes. F&T capacitors consistently measure with low ESR values, which is one reason why amps recapped with F&T capacitors often sound noticeably cleaner and more dynamic than the same amps recapped with budget components.

6. Warm, Musical Tone That Preserves Vintage Character

This is perhaps the most subjective point, but it's one that experienced amp technicians and players consistently agree on: F&T capacitors sound right in tube amplifiers. They preserve the original tonal character of the circuit — the warmth, the harmonic richness, the dynamic response — without adding harshness, thinness, or unwanted coloration. When you recap a 1965 Fender Deluxe Reverb or a 1972 Marshall Super Lead with F&T capacitors, it sounds the way the designer intended.

7. Trusted by Boutique Amplifier Builders

F&T capacitors aren't just used for repairs and restorations. They are the capacitor of choice for many of the world's most respected boutique amplifier builders, including Friedman Amplification, Bogner Amplification, Soldano, Dr. Z, and others. When builders who charge $3,000 to $5,000 for a new amplifier choose F&T capacitors, that tells you something about the quality and reputation of this brand.

What About Other Capacitor Brands?

We are sometimes asked why we don't use other brands. Here's our perspective:

  • JJ Electronic: JJ makes decent capacitors and they are popular due to their lower price point. However, in our 50 years of experience, JJ electrolytic capacitors have a higher failure rate than F&T and don't last as long. They can be an acceptable budget option, but they're not what we'd put in a customer's vintage Fender or Marshall.

  • Sprague/Cornell Dubilier (CDE): Sprague Atom capacitors were the original equipment in many vintage American amplifiers. The original Spragues were excellent. Modern Sprague/CDE production is adequate but has been inconsistent in quality compared to F&T.

  • Nichicon, Panasonic, Rubycon: These are excellent capacitor manufacturers for general electronics and some audio applications. However, their standard product lines are optimized for lower-voltage consumer electronics. Their high-voltage audio-grade offerings are limited compared to F&T's purpose-built range.

  • Generic/Unbranded capacitors: We would never use unbranded or generic capacitors in a recap. The risk of premature failure, inconsistent specs, and potential damage to other components is simply too high.

The Donald Lee Service Approach to Recaps

When we perform a recap at Donald Lee Service, here's what the process looks like:

  1. Visual Inspection: We examine all electrolytic capacitors for signs of physical degradation — bulging tops, leaking electrolyte, corroded leads, or discoloration.

  2. Electrical Testing: We measure the capacitance and ESR of existing capacitors using professional-grade test equipment to quantify their condition.

  3. Complete Replacement: We replace all electrolytic capacitors in the power supply and signal path, not just the ones that have visibly failed. A partial recap leaves degraded capacitors in the circuit that will fail sooner rather than later.

  4. F&T Installation: We install F&T capacitors matched to the original specifications — same capacitance value, same or higher voltage rating, and physically compatible with the original mounting.

  5. Bias Check and Adjustment: After the recap, we check and adjust the bias on all output tubes to ensure optimal performance with the fresh power supply.

  6. Full Testing: We test the amplifier at idle and under load, checking all voltages, listening for noise or oscillation, and verifying that the amp performs to specification.

  7. Burn-In: New electrolytic capacitors benefit from a brief burn-in period where they stabilize. We run the amplifier for a period after the recap to ensure everything settles in properly.

Common Amps We Recap with F&T Capacitors

We've performed cap jobs on virtually every major amplifier brand and model over our 50 years of electronic repair experience. Some of the most common include:

  • Fender: Twin Reverb, Deluxe Reverb, Super Reverb, Bassman, Princeton Reverb, Vibrolux Reverb, Champ, Pro Reverb, Bandmaster, Showman
  • Marshall: JTM45, JMP, Plexi, JCM800, JCM900, JCM2000, Super Lead, Super Bass
  • Vox: AC30, AC15
  • Ampeg: SVT, B-15, V4, VT-22
  • Mesa Boogie: Mark series, Rectifier series, Lonestar
  • Peavey: 5150, Classic series, VTM
  • Orange: OR series, Rockerverb, AD series
  • Hiwatt: DR103, DR504
  • Traynor: YBA-1, YBA-3, YSR-1
  • Sunn: Model T, Concert Lead
  • Music Man: HD series, RD series

How Often Should You Recap Your Amplifier?

As a general guideline:

  • Amplifiers 20+ years old that have never been recapped should be evaluated. The original capacitors are likely degraded even if the amp still "works."
  • Amplifiers 30+ years old almost certainly need a recap. At this age, capacitor failure is not a question of if, but when.
  • Gigging and touring amplifiers that see heavy use may need a recap sooner due to heat cycling and vibration stress.
  • Amplifiers stored in hot, humid environments (like Florida garages) may need a recap sooner due to accelerated electrolyte evaporation.

If you're hearing increased hum, reduced dynamics, crackling, or if your amp just doesn't sound as good as it used to, a recap with quality F&T capacitors may be exactly what it needs.

Schedule Your Recap at Donald Lee Service

Donald Lee Service has been performing professional amplifier recaps in Central Florida since 2014. As an authorized Fender Gold Service Center and QSC Premier Service Center, we have the expertise, the genuine parts access, and the specialized test equipment to do the job right.

We exclusively use F&T capacitors for every recap because after 50 years of electronic repair and thousands of cap jobs, we know they deliver the best combination of reliability, longevity, and tone. We back every recap with our 90-day labor warranty.

Ready to schedule a recap?

We serve all of Central Florida including Orlando, Kissimmee, St. Cloud, Lakeland, Tampa, Melbourne, and Daytona Beach. We also accept amplifiers shipped from anywhere in the United States.